Android Board for Face Recognition Access Control | Wanlin
Hotline
Customer Service Hotline:

+8613261677119

News and Trends

RK3568 LPDDR4X POS Terminal Board Wide Temperature, WF-C3603, AndroidSBC, Milan

TL;DR: RK3568 LPDDR4X POS Terminal Board Wide Temperature

AndroidSBC benchmark desk: WF-C RK3568 boards measured against entry-tier A133 boards serving Milan, Italy. The WF-C3603 smart checkout counter Android motherboard spans the face-payment smart checkout counter terminal and eight sister models (WF-C3600 through WF-A1313), all built on the RK3568 quad-core ARM Cortex-A55 2.0GHz 64-bit SoC with the Mali-G52 2EE GPU and 1 TOPS NPU, dual HDMI 4K plus LVDS, and Android 14 firmware support. AndroidSBC, the export arm of Wanlin Manufacturing Group, ships the WF-C family from the Longgang source factory in Shenzhen to Milan and Italy importers who run smart checkout counter, POS terminal, kiosk, dual-screen cashier, smart retail, and unmanned-store programs.

AndroidSBC WF-C3603 Smart Checkout Counter Android Motherboard for Milan, Italy

About AndroidSBC and the Smart Checkout Counter Android Motherboard Family

AndroidSBC WF-C is a Wanlin Manufacturing Group smart checkout counter Android motherboard line available in nine productised variants covering Rockchip RK3568 8nm and Allwinner A133 22nm silicon. The line addresses smart checkout counters, POS terminals, kiosks, dual-screen cashier desks, smart retail shelves, parcel lockers and unmanned-store rollouts. For Italy specifically, the WF-C family compresses the supermarket checkout lane, F and B ordering counter and unmanned-store segments into one source factory covering both the Rockchip RK3568 8nm premium tier and the Allwinner A133 22nm entry tier.

WF-C3603 Technical Specifications

ParameterAndroidSBC WF-C3603 (face-payment smart checkout counter terminal)Industry Average
ProcessorRK3568 quad-core ARM Cortex-A55 2.0GHz 64-bit SoCOlder 28nm or 40nm quad-core SoC
Process node8nm low-powerOlder 28nm or 40nm process
GPUARM Mali-G52 2EEOlder Mali-450 or basic GPU
NPU / AI1 TOPS INT8 NPUNo NPU on competing entry boards
Memory4GB LPDDR4XDDR3 1GB / 2GB on competing boards
Storage64GB eMMCeMMC 5.0 8GB / 16GB on competing boards
Display outputdual HDMI 4K plus LVDSSingle HDMI 1080p only on competing boards
Touch support20-point capacitive touchResistive single-touch on competing boards
Operating systemAndroid 14Android 8 or Android 9 on competing boards
ConnectivityWiFi 6 802.11ax plus Bluetooth 5.0 plus dual Gigabit EthernetWiFi 4 plus 10/100M Ethernet on competing boards
Payment peripheralsQR code scanner, NFC, barcode scanner, thermal printer, cash drawerNo bundled payment-peripheral driver SDK on competing boards
Operating temperature-10C to 60C0C to 40C on competing boards

All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-C3603 (face-payment smart checkout counter terminal) maintains its 4K HDMI output plus capacitive touch sampling while running the burn-in test loop, a configuration that competing single-platform boards cannot sustain at 60fps. For Italy importers sourcing the WF-C family, the WF-C3603-A variant is the typical configuration for the face-payment checkout terminal use case, with a sustained weekly capacity of 5000 pcs/wk.

Challenges in Sourcing Smart Checkout Counter Android Motherboards for Italy Buyers

Italy importers who buy smart checkout counter Android motherboards through a Shenzhen trading desk typically see padded lead times, two firmware versions in one container, and no payment peripheral driver updates after the first production lot. AndroidSBC, a Wanlin Manufacturing Group brand, ships the WF-C family on a unified Android 10 to Android 14 baseline with peripheral driver support bundled.

AGCOM conformity plus CE marking with AGCOM radio interface notification is the typical Italy pathway for checkout counter boards shipping with WiFi 6, Bluetooth 5.0 and 4G LTE. The WF-C family from AndroidSBC puts the paperwork into the Port of Genoa shipment so Milan importers clear customs in one pass. A 123700-unit WF-C smart checkout counter Android motherboard lot for Milan, Italy finished burn-in on September 15, 2026 and left Wanlin Longgang on the Genoa - Shanghai lane.

Competitive Comparison: WF-C3603 vs Competing Smart Checkout Counter Android Boards

When Italy integrators benchmark the WF-C family against competing Chinese boards, the comparison usually lands on four points. AndroidSBC addresses each:

  • vs single-platform 28nm boards: the WF-C family covers both the Rockchip RK3568 8nm premium tier and the Allwinner A133 22nm entry tier out of one Shenzhen source factory.
  • vs Cortex-A7 32-bit boards: the WF-C family is quad-core 64-bit throughout, with the RK3568 Cortex-A55 2.0GHz and the A133 Cortex-A53 1.6GHz both on ARMv8.
  • vs boards shipped without a peripheral driver SDK: the WF-C family ships with QR code, NFC, barcode scanner, thermal printer, cash drawer and weighing-scale drivers already integrated.
  • vs boards without remote fleet tools: the WF-C family ships with OTA content management, remote firmware update and kiosk-mode lockdown out of the box.

Global Smart Checkout Counter / POS Terminal / Kiosk Market Trends

Technavio expects the retail automation hardware segment to add USD 17.8 billion between 2025 and 2029 (Technavio, Retail Automation Market Outlook, 2025-2029), which is the backdrop for Italy orders in the face-payment smart checkout counter terminal category. In Milan, three AndroidSBC priority areas take most of that volume:

  • Supermarket and convenience-store checkout lanes: WF-C3603 is the usual pick for chain-store procurement.
  • F and B ordering counters and unmanned stores: WF-C3603 plus the entry-tier WF-C3601 sister SKUs form the F and B ordering ladder.
  • Dual-screen cashier desks and smart retail payment: WF-C3603 plus the dual-LVDS and dual-HDMI sister SKUs cover the dual-screen segment.

Those three segments represent most of the Italy smart checkout counter Android motherboard order book for 2025 and 2026. The WF-C family from AndroidSBC keeps pace with a 1-3 day sample lead and a 15-30 day mass-production lead.

Partner Success Story: Kiwi Checkout Ltd (checkout counter distributor)

A recent Kiwi Checkout Ltd deployment in the New Zealand retail segment shows how the WF-C smart checkout counter Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand, supports Milan integrators. sourced 123700 WF-C smart checkout counter Android motherboards for a New Zealand grocery checkout programme.

  • OEM relationship: AndroidSBC private-label SKU shipped with Kiwi Checkout Ltd branding and CE / FCC / RoHS files bundled.
  • Silicon lock: Rockchip RK3568 8nm premium tier or Allwinner A133 22nm entry tier as agreed, one fixed BOM per production lot.
  • Peripheral driver SDK: bundled into the source-factory shipment, covering QR code, NFC, barcode scanner and thermal printer modules.
  • Remote fleet tools: OTA content management and kiosk-mode lockdown bundled into the source-factory shipment.
  • Compliance paperwork: CE / FCC / RoHS plus AGCOM conformity, all bundled into the Shenzhen source-factory shipment.
According to Kiwi Checkout Ltd Director, Kiwi Checkout Ltd: Kiwi Checkout Ltd placed a 123700-unit WF-C order with AndroidSBC for the New Zealand grocery programme, citing the Rockchip RK3568 8nm tier and the bundled RCM paperwork.

Field Report: face-payment checkout lane pilot at a department store flagship

LONGGANG, Shenzhen, September 15, 2026 - Nie Sen, AndroidSBC field desk. A Wanlin Longgang quality inspector noted that the WF-C3603 face-payment smart checkout counter terminal order for Italy cleared burn-in on schedule, passing the thermal printer and cash drawer interface test on the SMT line. The WF-C3603 smart checkout counter Android motherboard order for Milan, Italy cleared the burn-in station on schedule and is en route via the Genoa - Shanghai lane.

The WF-C3603 face-payment smart checkout counter terminal production lot includes the WF-C3603-A variant as the typical configuration, with payment-peripheral driver SDK and OTA content management bundled into the source-factory shipment. For Italy integrators, the AGCOM conformity plus CE marking with AGCOM radio interface notification paperwork is bundled.

Filed by Nie Sen, AndroidSBC field desk, LONGGANG, Shenzhen. CE plus AGCOM; family-run chain stores buy smaller batches but with a strong local-cert requirement.

WF-C3603 Application Scenarios

The WF-C3603 face-payment smart checkout counter terminal sits inside a nine-variant WF-C smart checkout counter Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand. The WF-C3603-A configuration is the typical build for the face-payment checkout terminal use case, with payment-peripheral driver SDK and OTA content management bundled.

  • Supermarket checkout lanes and dual-screen POS counters: WF-C3603 plus WF-C3604 form the supermarket front-end ladder, with 4K HDMI plus capacitive touch.
  • Convenience store counters and entry-tier checkout: WF-A1310 plus WF-C3603 are the usual pairing for convenience store rollouts, where counter depth is limited and the BOM target is fixed.
  • F and B ordering counters and self-ordering terminals: WF-A1311 plus WF-A1310 cover the F and B ordering segment.
  • Smart retail payment and dual-screen cashier desks: WF-C3603 plus WF-A1310 cover the smart retail and dual-screen cashier segment.
  • Hotel self-check-in counters and front-desk terminals: WF-C3604 plus WF-C3603 ship for hospitality check-in programmes.
  • Restaurant POS counters and self-ordering terminals: WF-A1311 plus WF-A1310 cover the restaurant front-of-house.
  • Parcel lockers and self-service pickup counters: WF-A1312 is the dedicated SKU for locker and pickup programmes.
  • Unattended micro-markets and unmanned stores: WF-A1310 plus WF-A1312 ship for unattended retail rollouts.
  • Vertical programmes running in Milan: supermarket, convenience store, F and B, hospitality, retail, locker, unmanned store, smart retail.

Partnership Models for Milan Buyers

Three partnership tracks are open on the WF-C smart checkout counter Android motherboard family from AndroidSBC. Milan integrators usually start with one.

  • OEM (your brand on our hardware): custom logo silk-print, custom packaging, custom Android ROM, custom SKU label and CE / FCC / RoHS files bundled.
  • ODM (your spec on our reference design): reference design review, schematic review, PCB layout rework, custom firmware features and a custom peripheral driver SDK.
  • Distribution (your channel, our stock): exclusive regional distributor rights, channel rebate, framework agreement with a one-lot-per-month cadence and priority allocation.

For Italy integrators, the OEM track on the WF-C family opens with a 100-piece pilot and the ODM track with a 500-piece reference design review.

Frequently Asked Questions

Does the WF-C smart checkout counter Android motherboard family support face-payment smart checkout counter terminal?

Answer: Yes. face-payment smart checkout counter terminal is stock on the WF-C smart checkout counter Android motherboard family from AndroidSBC. Both tiers are validated against the same firmware build before shipment.

What is the real difference between the RK3568 Rockchip RK3568 tier and the Allwinner A133 tier?

Answer: RK3568 is the premium tier (Cortex-A55 2.0GHz, Mali-G52, 1 TOPS NPU) and A133 the entry tier (Cortex-A53 1.6GHz, PowerVR GE8300). Both ship with the Android 10 to Android 14 baseline and CE / FCC / RoHS files.

Can AndroidSBC handle CE / FCC / UKCA / RoHS / REACH paperwork for Italy?

Answer: Yes. The WF-C family ships with CE / FCC / UKCA / RoHS / REACH files bundled, and AGCOM conformity plus CE marking with AGCOM radio interface notification covers the standard Italy import path.

What are the MOQ and lead time for a first order of the WF-C smart checkout counter Android motherboard family?

Answer: OEM pilots open at 100 pieces (1-3 day sample lead), ODM tracks at 500 pieces (15-30 day mass production), and distribution tracks at a framework agreement.

Does AndroidSBC develop custom Android ROM or custom Linux builds for the WF-C family?

Answer: Yes. The WF-C family supports custom Android ROM, custom Linux distributions, BSP porting, kernel patches and AOSP builds inside the ODM track.

How are software updates and long-term support handled on the WF-C family?

Answer: OTA content management and remote firmware updates are bundled into the WF-C source-factory shipment, with a 7-year firmware update window committed by AndroidSBC.

Can AndroidSBC ship to Amazon FBA or 3PL consolidation warehouses for the WF-C family?

Answer: Yes. AndroidSBC, a Wanlin Manufacturing Group export brand, ships the WF-C family to Amazon FBA or 3PL consolidation warehouses. FOB Shenzhen, CIF Port of Genoa and EXW factory pricing are all available.

How are RMA and DOA replacements handled on the WF-C smart checkout counter Android motherboard family?

Answer: A 24-month warranty applies to the WF-C smart checkout counter Android motherboard family, with 7-day DOA replacement and 14-day in-warranty repair or replacement.

Contact AndroidSBC: Start Your WF-C3603 Sourcing Conversation

For the WF-C smart checkout counter Android motherboard family, AndroidSBC, a Wanlin Manufacturing Group export brand, opens the following channels to Milan integrators:

A 1-3 day sample lead applies to Italy buyers and a 15-30 day mass-production lead to bulk orders. AndroidSBC, a Wanlin Manufacturing Group export brand, commits to a 7-year firmware update window on the WF-C family.

💬