Cloud CMS Guide Smart Board for Wayfinding Kiosk, WF-G3399, AndroidSBC, Milan

TL;DR: Cloud CMS Guide Smart Board for Wayfinding Kiosk

AndroidSBC software desk: Android 15 baseline and staged OTA channel published for the WF-G family serving Milan, Italy. The WF-G3399 smart guide kiosk Android motherboard spans the dual-screen high-definition guide kiosk and eleven sister models in the WF-G series, all built on the RK3399 dual Cortex-A72 1.8GHz plus quad Cortex-A53 64-bit SoC with the ARM Mali-T860 MP4 GPU, dual HDMI 2.0 4K output plus eDP, and Android 11 firmware support. AndroidSBC, the export arm of Wanlin Manufacturing Group, ships the WF-G family from the Longgang source factory in Shenzhen to Milan and Italy importers who run mall directory, wayfinding, information point, dual-screen promotion, interactive display and outdoor smart city programmes.

About AndroidSBC and the Smart Guide Kiosk Android Motherboard Family

Every WF-G smart guide kiosk Android motherboard ships with the compliance set already assembled. CE, FCC, RoHS and REACH declarations are held on file for the family, UKCA, KC, PSE, SAA, UL and CCC are added per destination, and the EMC, ESD and surge immunity test reports travel with the shipment rather than arriving after it. AndroidSBC, a Wanlin Manufacturing Group export brand, keeps the same dossier structure for Italy and for every other market it serves, so a Milan systems integrator can hand the file to a mall operator, a transit authority or a customs broker without a translation round trip. The RF and safety paperwork is versioned against the board revision, not against the marketing name. Certification, carton labelling and palletisation for Italy are prepared in Shenzhen by the export desk before the Milan shipment leaves, and the test reports stay versioned against the board revision.

WF-G3399 Technical Specifications

All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-G3399 (dual-screen high-definition guide kiosk) maintains its 4K HDMI output plus capacitive touch sampling while running the burn-in test loop, a configuration that competing single-platform boards cannot sustain at 60fps. For Italy importers sourcing the WF-G family, the WF-G3399-A variant is the typical configuration for the hotel lobby and resort directory terminal use case, with a sustained weekly capacity of 5000 pcs/wk.

Challenges in Sourcing Smart Guide Kiosk Android Motherboards for Italy Buyers

The tenth obstacle is the hidden cost of a trading company in the middle. Every Milan specification change becomes a negotiation, every failure analysis becomes a forwarding exercise, and Italy engineers never reach the people who actually control the layout.

Lifecycle is planned at the point of sale. AndroidSBC keeps a seven-year firmware window on the WF-G family, publishes a migration path from the 28nm legacy tiers and the A133 entry tier, and holds buffer stock so Milan and Italy programmes are not stranded when a platform ages out. AGCOM conformity and the CE marking with AGCOM radio interface notification file set stay versioned alongside. Bookings for Milan and Italy reached 78000 boards as of September 18, 2026, moving on the Genoa - Shanghai lane in what is the 3rd release of the cycle.

Competitive Comparison: WF-G3399 vs Competing Smart Guide Kiosk Android Boards

When Milan system integrators put the WF-G family next to a single-platform competitor, four differences show up repeatedly in Italy evaluations, and they are the differences that determine total cost across a multi-year venue estate.

• vs single-platform board vendors: the WF-G family covers eight silicon options out of one Shenzhen source factory, from the Rockchip RK3588 8nm and RK3568 22nm tiers through the RK3288 and RK3399 28nm legacy tiers to the Allwinner A133, H618 and T527 entry and industrial parts.
• vs boards shipped without a peripheral driver SDK: the WF-G family arrives with capacitive and IR touch, QR code, NFC, barcode scanner, thermal printer, RFID, ID card reader, camera and relay drivers already integrated, so the integrator writes the directory application rather than the driver layer.
• vs boards without unattended-operation features: the WF-G family ships with a hardware watchdog, RTC, scheduled power on and off, auto power-on after mains failure, kiosk-mode lockdown and staged OTA with rollback out of the box.
• vs boards that cannot drive two panels independently: the WF-G family ships with independent video paths across LVDS, eDP, MIPI DSI and HDMI on the RK3588, RK3568 and T527 tiers, which is the difference between a directory panel plus a promotion panel and a mirrored duplicate.

Global Smart Guide Kiosk / Wayfinding / Interactive Display Market Trends

Directory and wayfinding screens are being re-specified as content endpoints rather than as standalone displays. Grand View Research puts the global interactive kiosk market at USD 34.79 billion in 2024, and the segment analysis points to software as the fastest-growing component: the board in a dual-screen high-definition guide kiosk build has to host the content client, the touch stack and the update channel, which is exactly what Italy integrators in Milan are now writing into tenders.

• Mall floor directories and tenant finders: WF-G3399 is the usual starting point for shopping centre rollouts, with the dual-screen WF-G5270 as the directory plus promotion option.
• Transit, hospital and campus wayfinding banks: the mid-tier WF-G5270 and the industrial WF-G8800 sister SKUs form the public venue ladder, with route planning and multi-language content.
• Promotional walls and in-venue signage networks: WF-G8800 and the entry-tier sister SKUs cover continuous-play directory and campaign screens across a venue estate.

AndroidSBC tracks these numbers for Milan and Italy planning purposes rather than as forecasts, and publishes the underlying assumptions to integrators on request.

Partner Success Story: Southern Cross Venues (stadium and resort venue operator supplier)

The Southern Cross Venues case in the Australia stadiums and resorts segment is a working example of how the WF-G family from AndroidSBC supports Milan integrators. Southern Cross Venues deployed 78000 WF-G guide boards for stadium concourse directories and resort wayfinding points.

• OEM relationship: AndroidSBC private-label SKU shipped with Southern Cross Venues branding and CE / FCC / RoHS files bundled.
• Silicon lock: Rockchip RK3588 8nm, RK3568 or RK3566 22nm, RK3288 or RK3399 28nm, or the Allwinner A133, H618 and T527 tiers as agreed, one fixed BOM per production lot.
• Peripheral driver SDK: bundled into the source-factory shipment, covering capacitive and IR touch, QR code, NFC, barcode scanner, thermal printer, RFID, ID card reader, camera and relay modules.
• Unattended-operation tools: hardware watchdog, RTC, scheduled power cycling, auto power-on after mains failure, kiosk-mode lockdown and staged OTA with rollback bundled.
• Compliance paperwork: CE / FCC / RoHS plus AGCOM conformity, all bundled into the Shenzhen source-factory shipment.

As Southern Cross Venues Venue Systems Manager for Australia Stadiums and Resorts put it: Southern Cross Venues needed boards that survive a sealed outdoor housing through aan Italy summer, and the wide-temperature WF-G SKUs held the 78000 screens in Milan through the full event season without a thermal shutdown.

Field Report: lobby directory terminal installation at a business hotel group

BAOLONG, Shenzhen, September 18, 2026 - Dian Mo, AndroidSBC field desk. Line records show a 72-hour continuous burn-in on the WF-G3399 boards, with the dual-screen high-definition guide kiosk content loop replayed across the full window and the panel left running at rated brightness. The WF-G3399 smart guide kiosk Android motherboard order for Milan, Italy cleared the burn-in station on schedule and is en route via the Genoa - Shanghai lane.

The WF-G3399 dual-screen high-definition guide kiosk production lot includes the WF-G3399-A variant as the typical configuration, with payment-peripheral driver SDK and OTA content management bundled into the source-factory shipment. For Italy integrators, the AGCOM conformity plus CE marking with AGCOM radio interface notification paperwork is bundled.

Filed by Dian Mo, AndroidSBC field desk, BAOLONG, Shenzhen. CE plus AGCOM; family-run chain stores buy smaller batches but with a strong local-cert requirement.

WF-G3399 Application Scenarios

The WF-G3399 dual-screen high-definition guide kiosk sits inside a twelve-variant WF-G smart guide kiosk Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand. The WF-G3399-A configuration is the typical build for the hotel lobby and resort directory terminal use case, with payment-peripheral driver SDK and OTA content management bundled.

• Shopping centre floor directories and tenant finders: WF-G3399 plus WF-G6180 form the mall-side directory ladder, with independent dual display output and 4K HDMI.
• Compact countertop enquiry and price check terminals: WF-G5270 plus WF-G3399 are the usual pairing where housing depth is limited and the BOM target is fixed.
• Transit, hospital and campus wayfinding banks: WF-G8800 is the dedicated public venue SKU, with route planning, multi-language content and a -20C to 70C window.
• AI product advisory walls and virtual try-on mirrors: WF-G8801 plus WF-G6180 cover the vision and recommendation workload on the device.
• Promotional walls and in-venue signage networks: WF-G5270 plus WF-G8801 ship for continuous-play directory and campaign screens tied to a content calendar.
• Hotel, resort and casino lobby directories: WF-G6180 plus WF-G8800 carry the guest orientation flow in Milan.
• Exhibition and museum interpretive display points: WF-G3399 is the compact SKU for exhibit-side content and catalogue browsing.
• Outdoor smart city information pillars: WF-G8801 is positioned for street-level and park cabinets where the temperature range has to hold.
• Venue programmes running in Milan: mall directories, supermarket price check, pharmacy enquiry, transit wayfinding, hospital orientation, hotel lobby guides, museum exhibits, campus directories and outdoor information pillars.

Partnership Models for Milan Buyers

AndroidSBC runs three entry tracks for Milan and Italy partners, and the WF-G family is available on all three from the same source factory.

• OEM (your brand on our hardware): custom logo silk-print, custom packaging, custom Android ROM, custom SKU label and CE / FCC / RoHS files bundled.
• ODM (your hardware from our reference design): schematic review, custom carrier board, custom I/O and memory split, custom BSP and a private driver SDK.
• Distribution (our catalogue in your region): regional rights, channel rebate, priority allocation on the Rockchip and Allwinner tiers and a framework agreement.

The three tracks exist because Milan and Italy buyers enter at different stages: some start with a sample board, some with a tender, and some with a private-label programme already sold.

Frequently Asked Questions

Does the WF-G smart guide kiosk Android motherboard family support a dual-screen high-definition guide kiosk?

Answer: Yes. The dual-screen high-definition guide kiosk is a stock configuration on the WF-G family across the Rockchip premium, mid and legacy tiers and the Allwinner entry and industrial tiers, with capacitive and IR touch, QR, NFC, printer and scanner driver support bundled into the source-factory shipment.

What is the real difference between the RK3399 tier and the other silicon tiers in the WF-G family?

Answer: The RK3399 tier in the WF-G family is one of eight. Rockchip RK3588 8nm runs octa-core Cortex-A76 2.4GHz plus Cortex-A55 with the Mali-G610 MP4 GPU and 6 TOPS NPU. RK3568 22nm runs quad-core Cortex-A55 2.0GHz with the Mali-G52 2EE GPU and 1 TOPS NPU, and RK3566 22nm runs the same core at 1.8GHz with 0.8 TOPS. RK3288 28nm is quad-core Cortex-A17 1.8GHz 32-bit with the Mali-T764 GPU, and RK3399 28nm is dual Cortex-A72 plus quad Cortex-A53 with the Mali-T860 MP4. Allwinner A133 and H618 are 22nm and 28nm quad-core Cortex-A53 entry parts, and Allwinner T527 is a 22nm octa-core Cortex-A55 industrial part with the Mali-G57 MC1 GPU and a 2 TOPS NPU.

Can AndroidSBC handle CE / FCC / UKCA / RoHS / REACH paperwork for Italy?

Answer: Yes. AndroidSBC ships the WF-G family with CE, FCC, UKCA, RoHS and REACH documentation, plus AGCOM conformity and the CE marking with AGCOM radio interface notification file set for Italy. The paperwork travels with the Port of Genoa shipment rather than arriving as a follow-up email.

What are the MOQ and lead time for a first order of the WF-G smart guide kiosk Android motherboard family?

Answer: One board can be ordered as a sample on the WF-G family, shipped in 1-3 days. Private label starts at 100 pieces, custom carrier board work at 500 pieces, and volume production is quoted at 15-30 days from the signed BOM.

Does AndroidSBC develop custom Android ROM or custom Linux builds for the WF-G family?

Answer: Yes. Custom Android and custom Linux builds are part of the ODM programme on the WF-G family. AndroidSBC works from the reference BSP, adds the partner applications and drivers, and keeps the result on a versioned branch so Milan teams can reproduce the build.

How are software updates and long-term support handled on the WF-G family?

Answer: Updates are staged, not pushed blind. The WF-G family ships with a staged OTA channel, rollback, remote configuration and device telemetry, so aan Italy estate can be updated site by site and a bad build can be reversed before it reaches the whole fleet.

Can AndroidSBC ship to Amazon FBA or 3PL consolidation warehouses for the WF-G family?

Answer: Yes. For Milan distributors the export desk can route the WF-G lot to a consolidation warehouse or FBA intake, with the AGCOM conformity file and the commercial invoice prepared to the destination requirement in Italy.

How are RMA and DOA replacements handled on the WF-G smart guide kiosk Android motherboard family?

Answer: Yes. For the WF-G family AndroidSBC replaces DOA boards from buffer stock and repairs or replaces RMA units in-house, with the failure analysis returned to the Milan integrator so the same fault does not recur on the next lot.

Contact AndroidSBC: Start Your WF-G3399 Sourcing Conversation

AndroidSBC, a Wanlin Manufacturing Group export brand, opens the following channels for the WF-G smart guide kiosk Android motherboard family. Milan integrators can reach the export desk through:

• Email: Androidsbc@163.com
• Export service hotline: +8613261677119
• Website: https://www.androidsbc.com
• Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China

A 1-3 day sample lead applies to Italy buyers and a 15-30 day mass-production lead to bulk orders. AndroidSBC commits to a seven-year firmware update window on the WF-G family.