UKCA Compliant Guide Kiosk Board, WF-G3601, AndroidSBC, Milan

TL;DR: UKCA Compliant Guide Kiosk Board

AndroidSBC export desk: OEM, ODM and distribution tracks open on the WF-G smart guide kiosk board family serving Milan, Italy. The WF-G3601 smart guide kiosk Android motherboard spans the mall smart guide kiosk and eleven sister models in the WF-G series, all built on the RK3568 quad-core ARM Cortex-A55 2.0GHz 64-bit SoC with the ARM Mali-G52 2EE GPU, HDMI 2.0 4K 60fps plus MIPI DSI, and Android 12 firmware support. AndroidSBC, the export arm of Wanlin Manufacturing Group, ships the WF-G family from the Longgang source factory in Shenzhen to Milan and Italy importers who run mall directory, wayfinding, information point, dual-screen promotion, interactive display and outdoor smart city programmes.

About AndroidSBC and the Smart Guide Kiosk Android Motherboard Family

Every WF-G smart guide kiosk Android motherboard ships with the compliance set already assembled. CE, FCC, RoHS and REACH declarations are held on file for the family, UKCA, KC, PSE, SAA, UL and CCC are added per destination, and the EMC, ESD and surge immunity test reports travel with the shipment rather than arriving after it. AndroidSBC, a Wanlin Manufacturing Group export brand, keeps the same dossier structure for Italy and for every other market it serves, so a Milan systems integrator can hand the file to a mall operator, a transit authority or a customs broker without a translation round trip. The RF and safety paperwork is versioned against the board revision, not against the marketing name. For Italy importers the working rhythm in Milan is a sample lot in 1-3 days, an OEM pilot from 100 pieces and a 15-30 day mass-production window once the BOM is signed off.

WF-G3601 Technical Specifications

All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-G3601 (mall smart guide kiosk) maintains its 4K HDMI output plus capacitive touch sampling while running the burn-in test loop, a configuration that competing single-platform boards cannot sustain at 60fps. For Italy importers sourcing the WF-G family, the WF-G3601-A variant is the typical configuration for the mall floor guide and tenant query counter use case, with a sustained weekly capacity of 5000 pcs/wk.

Challenges in Sourcing Smart Guide Kiosk Android Motherboards for Italy Buyers

The tenth obstacle is the hidden cost of a trading company in the middle. Every Milan specification change becomes a negotiation, every failure analysis becomes a forwarding exercise, and Italy engineers never reach the people who actually control the layout.

Fleet management is part of the reference image. The WF-G family ships with staged OTA, rollback, remote configuration and device telemetry hooks, so a Milan rollout in Italy can be updated in waves rather than all at once, with AGCOM conformity and CE marking with AGCOM radio interface notification paperwork moving with the lot through Port of Genoa. Bookings for Milan and Italy reached 169500 boards as of September 18, 2026, moving on the Genoa - Shanghai lane in what is the 3rd release of the cycle.

Competitive Comparison: WF-G3601 vs Competing Smart Guide Kiosk Android Boards

The competitive set for a smart guide kiosk board is wide, from single-chip vendor boards to full industrial computer modules. What separates them for Milan buyers in Italy is whether the vendor can cover an entry price-check screen and a multi-screen AI advisory wall from one firmware baseline.

• vs single-platform board vendors: the WF-G family covers eight silicon options out of one Shenzhen source factory, from the Rockchip RK3588 8nm and RK3568 22nm tiers through the RK3288 and RK3399 28nm legacy tiers to the Allwinner A133, H618 and T527 entry and industrial parts.
• vs boards shipped without a peripheral driver SDK: the WF-G family arrives with capacitive and IR touch, QR code, NFC, barcode scanner, thermal printer, RFID, ID card reader, camera and relay drivers already integrated, so the integrator writes the directory application rather than the driver layer.
• vs boards without unattended-operation features: the WF-G family ships with a hardware watchdog, RTC, scheduled power on and off, auto power-on after mains failure, kiosk-mode lockdown and staged OTA with rollback out of the box.
• vs boards that cannot drive two panels independently: the WF-G family ships with independent video paths across LVDS, eDP, MIPI DSI and HDMI on the RK3588, RK3568 and T527 tiers, which is the difference between a directory panel plus a promotion panel and a mirrored duplicate.

Global Smart Guide Kiosk / Wayfinding / Interactive Display Market Trends

Labour economics keep pushing the same direction. With information desks under staffing pressure in Italy, venue operators in Milan are converting more of the orientation moment to self-service: floor directories, tenant finders, route planners, exhibit guides and appointment check-in points. Each conversion is another mall smart guide kiosk board, and each one has to be managed as part of a fleet rather than as a standalone screen.

• Mall floor directories and tenant finders: WF-G3601 is the usual starting point for shopping centre rollouts, with the dual-screen WF-G3566 as the directory plus promotion option.
• Transit, hospital and campus wayfinding banks: the mid-tier WF-G3566 and the industrial WF-G3288 sister SKUs form the public venue ladder, with route planning and multi-language content.
• Promotional walls and in-venue signage networks: WF-G3288 and the entry-tier sister SKUs cover continuous-play directory and campaign screens across a venue estate.

The gap between a market forecast and a Milan order book is the board count per venue type, and AndroidSBC publishes the per-venue assumptions it uses for Italy so integrators can sanity-check their own numbers.

Partner Success Story: Southern Cross Venues (stadium and resort venue operator supplier)

The Southern Cross Venues case in the Australia stadiums and resorts segment is a working example of how the WF-G family from AndroidSBC supports Milan integrators. Southern Cross Venues deployed 169500 WF-G guide boards for stadium concourse directories and resort wayfinding points.

• OEM relationship: AndroidSBC private-label SKU shipped with Southern Cross Venues branding and CE / FCC / RoHS files bundled.
• Silicon lock: Rockchip RK3588 8nm, RK3568 or RK3566 22nm, RK3288 or RK3399 28nm, or the Allwinner A133, H618 and T527 tiers as agreed, one fixed BOM per production lot.
• Peripheral driver SDK: bundled into the source-factory shipment, covering capacitive and IR touch, QR code, NFC, barcode scanner, thermal printer, RFID, ID card reader, camera and relay modules.
• Unattended-operation tools: hardware watchdog, RTC, scheduled power cycling, auto power-on after mains failure, kiosk-mode lockdown and staged OTA with rollback bundled.
• Compliance paperwork: CE / FCC / RoHS plus AGCOM conformity, all bundled into the Shenzhen source-factory shipment.

Southern Cross Venues Venue Systems Manager for Australia Stadiums and Resorts noted: Southern Cross Venues needed boards that survive a sealed outdoor housing through aan Italy summer, and the wide-temperature WF-G SKUs held the 169500 screens in Milan through the full event season without a thermal shutdown.

Field Report: floor guide counter installation at a community shopping mall

SHENZHEN, September 18, 2026 - Chang An, AndroidSBC field desk. Line records show a 72-hour continuous burn-in on the WF-G3601 boards, with the mall smart guide kiosk content loop replayed across the full window and the panel left running at rated brightness. The WF-G3601 smart guide kiosk Android motherboard order for Milan, Italy cleared the burn-in station on schedule and is en route via the Genoa - Shanghai lane.

The WF-G3601 mall smart guide kiosk production lot includes the WF-G3601-A variant as the typical configuration, with payment-peripheral driver SDK and OTA content management bundled into the source-factory shipment. For Italy integrators, the AGCOM conformity plus CE marking with AGCOM radio interface notification paperwork is bundled.

Filed by Chang An, AndroidSBC field desk, SHENZHEN. CE plus AGCOM; family-run chain stores buy smaller batches but with a strong local-cert requirement.

WF-G3601 Application Scenarios

The WF-G3601 mall smart guide kiosk sits inside a twelve-variant WF-G smart guide kiosk Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand. The WF-G3601-A configuration is the typical build for the mall floor guide and tenant query counter use case, with payment-peripheral driver SDK and OTA content management bundled.

• Shopping centre floor directories and tenant finders: WF-G3601 plus WF-G3399 form the mall-side directory ladder, with independent dual display output and 4K HDMI.
• Compact countertop enquiry and price check terminals: WF-G1330 plus WF-G3601 are the usual pairing where housing depth is limited and the BOM target is fixed.
• Transit, hospital and campus wayfinding banks: WF-G1331 is the dedicated public venue SKU, with route planning, multi-language content and a -20C to 70C window.
• AI product advisory walls and virtual try-on mirrors: WF-G6180 plus WF-G3399 cover the vision and recommendation workload on the device.
• Promotional walls and in-venue signage networks: WF-G1330 plus WF-G6180 ship for continuous-play directory and campaign screens tied to a content calendar.
• Hotel, resort and casino lobby directories: WF-G3399 plus WF-G1331 carry the guest orientation flow in Milan.
• Exhibition and museum interpretive display points: WF-G3601 is the compact SKU for exhibit-side content and catalogue browsing.
• Outdoor smart city information pillars: WF-G6180 is positioned for street-level and park cabinets where the temperature range has to hold.
• Venue programmes running in Milan: mall directories, supermarket price check, pharmacy enquiry, transit wayfinding, hospital orientation, hotel lobby guides, museum exhibits, campus directories and outdoor information pillars.

Partnership Models for Milan Buyers

AndroidSBC structures the WF-G guide kiosk programme around three partner tracks for Milan and Italy, each with a different entry quantity and a different level of design control.

• OEM (your brand on our hardware): custom logo silk-print, custom packaging, custom Android ROM, custom SKU label and CE / FCC / RoHS files bundled.
• ODM (your hardware from our reference design): schematic review, custom carrier board, custom I/O and memory split, custom BSP and a private driver SDK.
• Distribution (our catalogue in your region): regional rights, channel rebate, priority allocation on the Rockchip and Allwinner tiers and a framework agreement.

AndroidSBC supports partners moving between tracks mid-programme in Milan, which is common when a distributor wins a tender that turns into a private-label line for Italy.

Frequently Asked Questions

Does the WF-G smart guide kiosk Android motherboard family support a mall guide kiosk?

Answer: Yes. AndroidSBC, a Wanlin Manufacturing Group export brand, ships the WF-G family with mall guide kiosk pre-loaded as a stock configuration, and every silicon tier carries the same firmware baseline and the same directory and wayfinding application interface.

What is the real difference between the RK3568 tier and the other silicon tiers in the WF-G family?

Answer: Within the WF-G family, RK3568 sits on a defined rung. RK3588 is the multi-screen and AI advisory tier; RK3568 and RK3566 are the mid tier for dual-screen directories, enquiry counters and wayfinding banks; T527 is the industrial and outdoor tier with a -40C to 85C silicon rating; RK3288 and RK3399 keep legacy estates and 28nm designs in production; A133 and H618 are the cost-driven entry tier for price check and promotional screens. All eight share one Android driver base.

Can AndroidSBC handle CE / FCC / UKCA / RoHS / REACH paperwork for Italy?

Answer: Yes. CE / FCC / RoHS are stock; UKCA, KC, PSE, SAA, UL and CCC are handled per destination. For Italy AndroidSBC bundles AGCOM conformity and CE marking with AGCOM radio interface notification into the same carton that clears Port of Genoa.

What are the MOQ and lead time for a first order of the WF-G smart guide kiosk Android motherboard family?

Answer: One board can be ordered as a sample on the WF-G family, shipped in 1-3 days. Private label starts at 100 pieces, custom carrier board work at 500 pieces, and volume production is quoted at 15-30 days from the signed BOM.

Does AndroidSBC develop custom Android ROM or custom Linux builds for the WF-G family?

Answer: Yes. AndroidSBC develops custom firmware in-house at the Longgang facility, covering AOSP builds, kernel drivers, boot animation, pre-installed apps and OTA staging logic. The Italy team receives the build tree, not just a binary image.

How are software updates and long-term support handled on the WF-G family?

Answer: Updates are staged, not pushed blind. The WF-G family ships with a staged OTA channel, rollback, remote configuration and device telemetry, so aan Italy estate can be updated site by site and a bad build can be reversed before it reaches the whole fleet.

Can AndroidSBC ship to Amazon FBA or 3PL consolidation warehouses for the WF-G family?

Answer: Yes. For Milan distributors the export desk can route the WF-G lot to a consolidation warehouse or FBA intake, with the AGCOM conformity file and the commercial invoice prepared to the destination requirement in Italy.

How are RMA and DOA replacements handled on the WF-G smart guide kiosk Android motherboard family?

Answer: Yes. For the WF-G family AndroidSBC replaces DOA boards from buffer stock and repairs or replaces RMA units in-house, with the failure analysis returned to the Milan integrator so the same fault does not recur on the next lot.

Contact AndroidSBC: Start Your WF-G3601 Sourcing Conversation

AndroidSBC, a Wanlin Manufacturing Group export brand, opens the following channels for the WF-G smart guide kiosk Android motherboard family. Milan integrators can reach the export desk through:

• Email: Androidsbc@163.com
• Export service hotline: +8613261677119
• Website: https://www.androidsbc.com
• Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China

A 1-3 day sample lead applies to Italy buyers and a 15-30 day mass-production lead to bulk orders. AndroidSBC commits to a seven-year firmware update window on the WF-G family.